PENGARUH SUHU PIROLISIS TERHADAP KADAR FIXED CARBON DARI KARBON AKTIF KULIT BATANG SAGU

Authors

  • Muhammad Nur Alam

Keywords:

Activated Carbon, Sago, Pyrolisis, Temperature

Abstract

The purpose of this study was to determine the effect of pyrolysis temperature and chemical activation with phosphoric acid on the fixed carbon content of activated carbon and determine the pyrolysis temperature in the manufacture of activated carbon from sago bark in accordance with SNI.6-3730-1995 standards. Sago plants in Luwu Regency, South Sulawesi Province are plants that contain a lot of starch and lignin-cellulose which have the potential to be used as activated carbon. This research was initiated by smoothing the bark of sago stems with a crusher and then pyrolyzed at temperatures of 4000C, 5000C, 6000C and 7000C and then activated with 10% H3PO4. The results of this study obtained Fixed carbon successively 68.64 %; 70.86%; 76.88%; and 80.51% at various pyrolysis temperatures. Data that meets the standard of SNI No. 06-3730-1995 is at a pyrolysis temperature of 7000C, namely the fixed carbon content of 80.51. These results indicate that activated carbon from sago bark can be recommended as activated carbon that can be applied as an adsorbent in various fields.

Downloads

Download data is not yet available.

References

[1] Syakir M, Bintoro MH, dan H agusta, 2009. Pengaruh Ampas Sagu Dan Kompos Terhadap Produktivitas Lada Perdu. Jurnal Littri 15:168-173.

[2] Kiat, LJ. 2006, Preparation And Characterization Of Carboxymethyl Sago Waste And It's Hydrogen (Tesis). Malaysia, University Putra Malaysia.

[3] Garcia-Garcia, A., Gregorio A., Boavida, D., Gulyurtlu, I. 2002. Production And Characterization Of Activated Carbon From Fine Wastes Gasified In A Pilot Reactor, National Institute Of Engineering And Industrial Technology. Estrada Do Paco Do Lumiar, 22, Edif. J, 1649-038, Libson. Potrugal.

[4] Jamilatun, S. Dan Martono, S. 2014. Pembuatan Arang Aktif Dari Tempurung Kelapa Dan Aplikasinya Untuk Penjernihan Asap Cair, Spektrum Industri, Vol. 12, No.1, 1-112. ISSN: 1963-6590.

[5] Esterlita M., O, dan Herlina N, 2015. Pengaruh Penambahan Aktivator ZnCl2, KOH, Dan H3PO4 Dalam Pembuatan Karbon Aktif Dari Pelepah Aren (Arenga Pinnata). Jurnal Teknik Kimia. USU, vol 4 No 1.

[6] Pari, G., D. Hendra, 1999. Pembuatan Arang Aktif Dari Tandan Kosong Kelapa Sawit. Bogor. Buletin Penelitian Hasil Hutan. vol 17, No 2 pp. 113-122.

[7] Kuriyama, A. 1961. Destructive Distillation of Wood. Ministry of Agriculture and Forestry Overseas. Technical Cooperation Agency. Tokyo.

Downloads

Published

2022-10-20

How to Cite

[1]
M. N. Alam, “PENGARUH SUHU PIROLISIS TERHADAP KADAR FIXED CARBON DARI KARBON AKTIF KULIT BATANG SAGU”, CJCS, vol. 4, no. 2, pp. 19–22, Oct. 2022.

Issue

Vol. 4 No. 2 (2022)

Section

Articles

License

In submitting the manuscript to the journal, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.

License and Copyright Agreement

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.