PENGUJIAN SIFAT FISIKA DAN KIMIA SEMEN YANG DIBUAT DENGAN MENGGUNAKAN BAHAN BAKU LIMBAH ABU KERTAS

Bahasa Indonesia

Authors

  • Hasrawati Bahar Universitas Syekh Yusuf Al Makassari Gowa

Keywords:

Abu, Fisika-kimia, Kertas koran, Semen.

Abstract

Sebagai negara yang maju  dan berkembang, Indonesia akan selalu  melakukan pembangunan dalam segala bidang kehidupan. Salah satu sektor yang terus berkembang adalah sektor infrastruktur. Menghadapi fenomena pertumbuhan infrastruktur ini, khususnya di bidang pembangunan perlu adanya hal yang menunjang dalam setiap pembangunan yang terjadi, salah satunya adalah material semen. Abu kertas koran merupakan salah satu alternatif yang dapat dijadikan sebagai bahan dalam pembuatan semen. Tujuan dari penelitian ini adalah untuk mengetahui sifat fisika dan kimia pada semen dari abu kertas koran. Kualitas semen didasarkan pada Standar Nasional Indonesia  15-2049-2004. Hasil pengujian sifat fisika dan kimia pada semen  yang dibuat dengan menggunakan bahan baku abu kertas koran diperoleh densitas serbuk, kuat tekan, kadar hilang pijar, kadar bagian tak larut, kadar SO3, kadar SO2 berturut-turut 0.0203 g/cm3; 9.45 kN; 0.07 %; 9.78%; 6.56%; 73.78%.

Downloads

Download data is not yet available.

References

[1] J. A. Pribadi And M. Sastra, “Ekosemen Sebagai Media Perekat Pengganti Semen Untuk Beton,” Jurnal Gradasi Teknik Sipil, Vol. 2, No. 1, Pp. 44–51, 2018.
[2] A. Z. Uzaqbayevna, “Studies On The Chemical Composition And Properties Of Portland Cement,” Eurasian Journal Of Academic Research, Vol. 3, No. 3, Pp. 13–21, 2023.
[3] M. Syarif, “Analisis Sifat Fisik Semen Organik Terbuat Dari Bahan Limbah Daur Ulang,” Jurnal Linears, Vol. 2, No. 1, Pp. 18–23, Mar. 2019.
[4] R. A. I. Sari, S. E. Wallah, And R. S. Windah, “Pengaruh Jumlah Semen Dan Fas Terhadap Kuat Tekan Beton Dengan Agregat Yang Berasal Dari Sungai,” Jurnal Sipil Statik, Vol. 3, No. 1, Pp. 68–76, 2015.
[5] R. Febriasto, N. L. P. S. Satyaning, And Wibawati, “Prediksi Kuat Tekan Semen Untuk Produk Portland Composite Cement (Pcc) Di Pt. Semen Indonesia (Persero) Tbk. Menggunakan Support Vector Regression (Svr) Dengan Feature Selection,” Jurnal Sains Dan Seni Its, Vol. 8, No. 2, 2019.
[6] S. Mulyono, D. Azizah, And H. Setiyabudi, “Optimasi Channel Xrd Arl 9900 Sebagai Metode Alternatif Untuk Analisa Limestone Dalam Semen,” Politeknologo, Vol. 17, No. 3, Pp. 239–249, 2018.
[7] N. Irawati, N. T. Putri, And A. Herryandie, “Strategi Perencanaan Jumlah Material Tambahan Dalam Memproduksi Semen Dengan Pendekatan Taguchi Untuk Meminimalkan Biaya Produksi (Studi Kasus Pt Semen Padang),” Jurnal Optimasi Sistem Industri, Vol. 14, No. 1, Pp. 176–191, 2015.
[8] M. S. Amin, M. Ghulam, And T. Yayuk, “Pengarug Penambahan Batu Kapus (Limestone) Terhadap Karakteristik Semen,” Construction And Material Journal, Vol. 1, No. 2, Pp. 141–150, 2019.
[9] Narita And Mawardi, “Pengaruh Variasi Temperatur Curing Terhadap Bagian Tak Larut Dan Hilang Pijar Semen Geopolimer Berbasis Tanah Napa Pesisir Selatan,” Journal Of Residu, Vol. 3, No. 19, Pp. 125–130, 2019.
[10] K. Erianto And M. Darmawan, “Suggestion To Improve The Quality Of SO3 Levels In Opc Cement Using The Six Sigma Method At Pt - Itp Tbk.,” Jurnal Asiimetrik : Jurnal Ilmiah Rekayasa Dan Inovasi, Pp. 61–72, 2020.

Downloads

Published

2023-07-29

How to Cite

[1]
H. Bahar, “PENGUJIAN SIFAT FISIKA DAN KIMIA SEMEN YANG DIBUAT DENGAN MENGGUNAKAN BAHAN BAKU LIMBAH ABU KERTAS: Bahasa Indonesia”, CJCS, vol. 5, no. 2, pp. 55–59, Jul. 2023.

Issue

Vol. 5 No. 2 (2023)

Section

Articles

License

In submitting the manuscript to the journal, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  • That it is not under consideration for publication elsewhere,
  • That its publication has been approved by all the author(s) and by the responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.

License and Copyright Agreement

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.